Jiangsu Bealloy Co.,Ltd produce special alloy products, including Bar, Rod, Sheet, Plate, Pipe, Tube, Pipe Fittings, Rings, Forgings, Flange, Coil and Strip, etc. If any requirements not found, please email us sales@bealloy.com. We will offer you best price and more details. Any customizationare accepted.
| C | Si | Mn | S | P | Cr | Ni | Mo |
| 0.14 - 0.19 | 0.15 - 0.40 | 0.40 - 0.60 | max 0.035 | max 0.035 | 1.50 - 1.80 | 1.40 - 1.70 | 0.25 - 0.35 |
|
Tensile strength σb (MPa) |
1180 - 1420 |
|
Yield strength σs (MPa) |
835 |
|
Elongation δ (%) |
≥7 |
|
Section shrinkage rate ψ (%) |
≥30 |
|
Impact toughness value αkv (J / cm2) |
≥41 |
In what applications is 17CrNiMo6 used?
Widely used in gearbox gear, it has high bending strength, contact fatigue strength, 17CrNiMo6 also has high hardness and wear resistance, and its core has high hardness and toughness. The comprehensive mechanical properties are high.
Delivery status
Delivery in the heat treatment (normalizing, annealing or high temperature tempering) or non-heat treatment status. The delivery status should be specified in the contract.
- Nickel Based Alloys
-
Super Special Stainless
- Duplex 2205/ S31803/1.4462/F51
- Duplex 2507 / S32750 / 1.4410 /F53
- Duplex S32760 / 1.4501 / F55
- 904L / UNS N08904 / 1.4539
- 253 MA / S30815 / 1.4835
- 254 SMO / S31254 /1.4547
- 17-4PH / AISI630 / 1.4542
- AISI 316Ti / 1.4571
- 317L Stainless Steel
- AISI 310MOLN / 1.4466 Stainless Steel
- 347/347H 1.4550 Stainless Steel
- UNS N08367 / AL-6XN® / 1.4529
- Stainless Steel
- Alloy Steel
- TITANIUM AND TITANIUM ALLOYS